Hebei Fergus Carbide Tool Co., Ltd. (cemented carbide products under the plant and blade grinding plants) located in the hometown of the "Tiger hero Wu Song --- Qinghe County. This 'good faith, to keep its promise' for the purpose of business development, business development goals 'business growth decade has witnessed'. Adhere to the companies to do better 
 Part of the welding heads Material: YT14, YT15, YT5, YW1 YW2, YT30, YS25, YG3, YG3X, YG6, YG6A, YG6X, of YG8, YS8, YT726, YG813, YG643, etc. 
 Part of the welding heads Model: A112, A114, A116, A118, A118A, A120, A122, A125, A130, A136, A140, A150, A160, A170, A220, A312, A315, A320, A320Z, A325, A325Z, A330, A340, A412, A420, B212, B214, B216, B218, B220, B225, B228, C116, C120, C122, C125, C303, C304, C305, C306, C308, C420, C425, C539, C545, D112, D115, D120, D214, D216, D218, D220, D222, D224, D228, D236, D240, D246, E522, E525, E315, E540, F112, F118, etc. 
 A variety of material specifications of the milling insert, machine folder milling inserts, 4160511,3130511,31303 C and so on 
 Cutting blade carbide grade and performance: 
 Grade equivalent to the ISO group code density 
 g \ cm3 bending strength 
 MPa hardness 
 HRA purposes 
 YT15 
 YT05 P10 11.3 
 12.6 1300 
 126 091 
 92.5 for steel, cast steel finishing and semi-finishing, the medium feed to the amount and the higher the cutting speed. 
 YC201 
 YT14 
 YS25 P20 11.79 
 11.4 
 13.0 1400 
 1400 
 1780 91.8 
 90.5 
 90.5 for steel, cast steel finishing and semi finishing, should adopt the medium feed rate, YS25 in steel, cast steel milling. 
 YT5 of P30 12.8 1570 89.5 applies to steel, cast steel, heavy cutting, poor operating conditions in low-speed large amount of roughing. 
 YC45 P40 12.75 2250 90 applies to steel, cast steel cutting of gravity, can be large cutting parameters, and also used for face milling. 
 YS8 M05 13.9 1720 92.5 applies to iron base, nickel-base superalloys, the strength of steel finishing, also apply to chilled cast iron, heat-resistant stainless steel, high manganese steel, hardened steel finishing. 
 YW3 
 YW1 the M10 12.9 
 131 390 
 129 092 
 91.5 applies to stainless steel, alloy steel finishing and semi finishing. 
 YN201 
 YS2T 
 YW2 the M20 13.9 
 14.4 
 12.9 1600 
 1960 
 1460 93.0 
 91.5 
 90.5 applies to semi-finishing of stainless steel, low alloy steel. 
 The YM30 M30 is 14.5 2000 91.5 applies to the heat-resistant alloy roughing. 
 YG3X 
 YG3 K05 15.1 
 15.0 1300 
 1300 91.5 
 90.5 applies to the finishing of cast iron, nonferrous metals. 
 YM201 
 YG6X the K10 13.9 
 14.8 1600 
 1560 93.0 
 91.0 for cast iron, non-ferrous metal finishing, semi-finishing, can also be used in manganese steel, hardened steel machining. 
 YD201 
 YG6 
 Of YG8 K20 14.89 
 14.9 
 14.6 1800 
 1670 
 1840 91.0 
 89.5 
 89 for cast iron, light alloy semi-finishing, roughing, and also for the milling of cast iron, low alloy steel. 

 Tips: carbide products, hard and brittle, improper handling or clamping are likely to cause damage of the product, is installed correctly. 
 Processing may produce cutting splash, and the frequent use of the coolant, so take the necessary safety measures in the course of processing, such as the use of ventilation equipment, equipped shield, and wear glasses, wear overalls. After sharpening the blade, sharp blade, clamping Please note that to protect the hand.